Sylvania DVL100CB owner manual Connecting to a Dolby Digital Decoder Or DTS Decoder

If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked “ANT IN”), then connect the RF modulator to your TV’s antenna terminal as described above.

Note

¡The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal through an RF Modulator.

CONNECTING TO A DOLBY DIGITAL DECODER

OR DTS DECODER

If using this DVD player to play back a DVD in a 5.1 channel Dolby Digital surround or DTS surround format, the DVD player outputs a Dolby Digital or DTS data stream from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound of a professional standard such as can be heard in movie theaters.

Use audio coaxial digital cables (commercially available) for the audio connections.

A/V-compatible

or wide screen TV

To S-VIDEO INPUT jack	To S-VIDEO OUT jack
or
To VIDEO	To VIDEO
INPUT jack	OUT jack	COMPONENT	Y
	R	VIDEO OUT	Cr
		L

PCM /	Cb
BITSTREAM

Center speaker

AUDIO OUT VIDEO	S-VIDEO	COAXIAL
OUT	OUT	DIGITAL AUDIO OUT

Front speaker (left)

Dolby Digital or DTS decoder

Surround

speaker (left)

Front speaker (right)

To COAXIAL DIGITAL

AUDIO INPUT jack

Surround	Subwoofer
speaker
(right)

To COAXIAL DIGITAL AUDIO OUT jack

[Fig. 6]

Notes

¡Be sure to turn off the power to all components in

the system before connecting another component.

¡Refer to the Owner’s Manuals for the components to be connected to the DVD player.

¡If connected to a Dolby Digital decoder, set Dolby Digital to on for audio output in the setup mode.

¡If connected to a DTS decoder, set DTS to ON for audio output in the setup mode.

¡Unless connected to a Dolby Digital decoder or a DTS decoder, set Dolby Digital and DTS to off for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise distor- tion, and may also damage the speakers.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D sym- bol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992- 1997 Dolby Laboratories, Inc. All rights reserved.

DTS is a trademark of Digital Theater Systems Inc. in the United States of America.

– 12 – EN

1A29