Hints for timer recording

Recording

Timer recording (cont’d)

• If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer set-

tings will be lost.
• If a disc is not on the tray, the	indicator flashes and timer recording cannot be performed. Please insert a record-
able disc.
• When all the timer recording is completed, the			indicator flashes.To play or eject the recorded disc, press POWER
button first, and then press PLAY B or OPEN/CLOSE A button.
• During timer recording or timer standby (		indicator is on the front display), any operations on the unit will not be
available.To make these operations available, cancel the timer recording or timer standby first (				indicator disappears).

• To cancel the timer standby mode, press POWER button.

The priority of overlapped settings

This unit records the programs according to priority if the timer programmings are overlapped.The timer programming set previously has priority. A timer recording of lower priority will be canceled, start from the middle, or stop on the way. Check the overlapped timer programmings and change the priority if necessary.

A programming set previously has priority