Sylvania DVR90DEA owner manual Connection to an Audio System

Connections

Connection to an Audio System

•When you change the connections, all devices should be turned off.

•Refer to each owner’s manual for further information on other devices.

Before you

Method 1

Stereo system

Analog audio input jacks

AUDIO

Audio cable

(supplied)

DVD Recorder

AUDIO OUT

or

Method 2

Dolby Digital decoder,

MD deck or DAT deck

Digital audio input jack

COAXIAL

Audio Coaxial

Digital cable

(commercially

available)

DIGITAL

AUDIO OUT

Note

•If output is Dolby Digital encoded audio, connect to a Dolby Digital decoder, and set “Dolby Digital” to “Stream” for the “Digital Out” setting in the SETUP menu. (Refer to pages 88-89.)

•The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD or DAT deck.

•Unless connected to a Dolby Digital decoder, set “Dolby Digital” to “PCM” for the “Digital Out” setting in the SETUP menu. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speak- ers. (Refer to pages 88-89.)

•Set “Dolby Digital” to “PCM” for the “Digital Out” set- ting in the SETUP menu for connecting to an MD deck or DAT deck. (Refer to pages 88-89.)

•By hooking this unit up to a Multi-channel Dolby Digital decoder, you can enjoy high-quality Dolby Digital 5.1 channel surround sound as heard in the movie theaters.

start Connections Getting started Recording Playing discs Editing

Changing the SETUP menu Others

Español

15