Sylvania H2160SL9 owner manual Marker Setting, Chasing Playback during Recording

SPECIAL PLAYBACK

Marker Setting Chasing Playback during Recording

Introduction

This feature allows you to assign a specific point on a disc to be called back later.

1)During playback, press [DISPLAY].

2)Use [{ / B] to select , then press [ENTER] within 1 second, or wait for 1 second to display the marker list.

e.g.) DVD-video

1/ 5 1/ 5 0:01:00 / 1:23:45

DVD Video

3)Use [K / L] to select a desired marker number.

When it reaches the desired point, press [ENTER].

1/ 5 1/ 5 0:01:00 / 1:23:45

DVD Video

1---

2---

3---

4---

5---

6---

The title (track) number and the time will be displayed.

4)To return to the marker:

Use [K / L] to select the desired marker number, then press [ENTER].

Note

•To clear a marker, select the marker number to be cleared, then press [CLEAR].

•All markers are erased when you perform the following operations.

-Opening the disc tray (CD/DVD only)

-Turning off the power (CD/DVD only)

-Making additional recording on the disc (DVD only)

-Editing any title (DVD only)

-Dividing the title (HDD only)

-Combining the title (HDD only)

-Deleting a scene of the title (HDD only)

-Changing the mode between Original and Playlist. (VR mode DVD-RW disc only)

You can play back a title being recorded from the beginning while recording continues.

1)During recording, press [PLAY B].

Playback of the title you are recording will start from the beginning.

•Elapsed playback time will be displayed in the front panel display.

2)Press [STOP C] once to stop playback.

The front panel display will switch back to show the elapsed recording time.

If you press [STOP C] twice, it will stop the recording.

Note

•You can also use the special playback functions such as [REV E], [FWD D] etc. during chasing playback mode.

•[REC/OTR] is invalid during chasing playback.

•You can no longer fast forward the playback when it comes to a few seconds before the current recording point.

Simultaneous Playback and Recording

With regard to HDD, you can continue recording a program while playing back another title in the same component (HDD).

To do so, press [TOP MENU] during recording and select a title you like to play back, and then press [PLAY B]. (You can also start the playback from the title list menu.)

To playback a title being recorded while continuing to record, refer to “Chasing Playback during Recording” on this page (available only with HDD).

EN 69

Disc Connections Basic Setup Management Recording Playback Editing Function Setup Others

Español