Sylvania H2160SL9 owner manual Video, Selected item, Refer 1 to 2 on this page and set

GENERAL SETTING

Video

INPUT OPEN/

POWER DTV/TV SELECT CLOSE

.@/: ABC DEF

GHI JKL MNO CH

PQRS TUV WXYZ

CLEAR

SETUP AUDIO REPEAT HDMI

MENU/LIST TOP MENU

ENTER

DISPLAYRETURN

VARIABLE

SKIP REPLAY SKIP SKIP

PLAY

BX1.3/0.8 STOP PAUSE

DUBBING HDD DVD

Press [STOP C] if you are playing back an HDD or a disc.

1Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER].

2Use [K / L] to select “Video”, then press [ENTER].

3Use [K / L] to select a desired item, then press [ENTER].

1 Progressive

2TV Aspect

3 Select Video

Submenu will appear.

4	Refer 1 to 2 on this page and set
	the selected item.
	• For 3 , refer to “Connection to an External

Device“ on page 53.

5When you finish with the setting, press [SETUP] to exit.

1 Progressive (Default : OFF)

This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set progressive scan mode to “ON”.

1) Use [K / L] to select “ON“, then press [ENTER].

General Setting
Playback
Display	Progressive
Video	TV Aspect
Recording	Progressive
	Select Video
Clock	ON
	OFF
Channel
HDMI

2) Use [{ / B] to select “Yes“, then press [ENTER].

General Setting

Playback				scan:
Activating progressive
Display				Progressive
Check your	TV has		progressive scan
Video				TV Aspect
and connect	withProgressivecomponent video cable.
Rcording				Select Video
Clock		ON
		OFF
Channel
NOTE :
HDMI If there	is no picture or picture is
Reset All
distorted after selecting “Yes”,

Wait about 15 seconds for auto recovery.

Activate? Yes No

3)Use [K / L] to select “Yes“ within 15 seconds, then press [ENTER].

Your setting will be activated.

Note

•If your TV is compatible with progressive scan (480p), you are recommended to use the HDMI or component video cable (commercially available) to connect this unit to the TV. (Refer to “Method 3” on page 20 or page 21.) If not, use the RCA video cable and set the progressive scan to “OFF”.

•If the Progressive Scan image is distorted, you can cancel Progressive Scan by pressing and holding [SETUP] for more than 3 seconds during HDD/DVD playback. The “Progressive” setting will be “OFF”.

•When selecting “No” or not pressing any buttons on the unit or remote control within 15 seconds at step 3, progressive scan remains to be “OFF” (interlace scan).

2 TV Aspect (Default: 4:3 Letter Box)

You can select the TV aspect ratio to match the formats of what you are playing back with the unit and your TV screen (4:3 standard or 16:9 widescreen TV).

Use [K/ L] to select a desired option, then press [ENTER].

General Setting
Playback
Display	Progressive
Video	TV Aspect TV Aspect
Recording	Select Video
Clock	4:3 Letter Box
	4:3 Pan & Scan
Channel
	16:9 Wide
HDMI
Reset All

If you have a standard TV:

Select “4:3 Letter Box”, so that black bars appear on the top and bottom of the TV screen when playing back a wide-screen picture. Select “4:3 Pan & Scan” for a full height picture with both sides trimmed when playing back wide-screen picture.

If you have a widescreen TV:

Select “16:9 Wide”.

102 EN