Sylvania H2160SL9 Press Stop C to stop recording, I HDD or I DVD mark will be displayed

BASIC RECORDING & ONE-TOUCH TIMER RECORDING

Press [REC/OTR] to start recording.	8	Press [STOP C] to stop recording.
The “I HDD” or “I DVD” mark will be displayed		The recorded title will be included in the title list.
7 on the TV screen briefly.		(Refer to “Guide to a Title List” on page 76.)

I DVD
	Wait for a moment	90%

Introduction Connections

Press [PAUSE F] to pause recording.

Press [PAUSE F]] or [REC/OTR] again to restart recording.

To set one-touch timer recording (OTR)...

This is a simple way to set the recording time in blocks of 30 minutes.

Press [REC/OTR] repeatedly until the desired recording time (30 minutes to 8 hours) appears on the TV screen. One-touch timer recording will start.

I0:30

0:30

(normal recording) 1:00

8:00 7:30

•To change the recording length during one-touch timer recording, press [REC/OTR] repeatedly until the desired length appears.

•To cancel one-touch timer recording within the specified time, press [STOP C].

This operation may take awhile to be completed.

Disc Basic Setup Management Recording Playback

Note

•When you press [REC/OTR], recording starts immediately and continues until the HDD or disc is full, record 12 hours to HDD or you stop recording.

•When the unit clock has not been set, the space for a date and time of title names will be blank.

•When you record a TV program onto HDD / DVD-RW/-R, you have to select the TV channel audio beforehand. Only the selected channel audio will be recorded. Refer to “Selecting TV Audio” on pages 34-35 for more details.

•You cannot change the recording mode during the recording pause mode.

•You can change a channel to be recorded during the recording pause mode.

•You can play back a title on one component while making a recording on other. To do so, simply select the component (HDD or DVD) you like to use for the playback by pressing [HDD] or [DVD] during HDD / DVD recording. And then follow the normal playback procedure.

•If playback and recording are in progress at the same time, select the appropriate component by pressing [HDD] or [DVD] before you press [PAUSE F] or [STOP C] to pause or stop the operation.

Note for one-touch timer recording

•The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press [DISPLAY] to see it on the TV screen.

•Unlike the timer recording, you can perform the following operations during one-touch timer recording.

-Turning off the power (One-touch timer recording will be canceled.).

-Using [REC/OTR] on the remote control.

•You cannot use the pause function during one-touch timer recording.

EN 47

Editing Function Setup Others

Español