English

TROUBLESHOOTING

INTRODUCTION

 

 

 

 

 

 

 

 

FAQ

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PREPARATION

Question

Answer

 

 

• Check the antenna or cable connection to the main unit.

 

 

• Check the batteries of the remote control.

 

 

• Check if there is an obstacle between the infrared sensor window and the remote

 

 

 

control.

 

My remote control does not

• Test the signal output. If OK, then possible infrared sensor trouble.

 

 

[IR Signal Check] p.34

WATCHING

work.

When there is an infrared-equipped device such as PC near this unit, it may interrupt

Aim the remote control directly at the infrared sensor window on the front of the unit.

 

What should I do?

Reduce the distance to the unit.

 

 

Re-insert the batteries with their polarities (+/– signs) as indicated.

 

 

 

the remote control signal of this unit.

TV

 

• Move the infrared-equipped device away from this unit, change the angle of the infrared

 

 

 

sensor or turn off the infrared communication function.

 

this unit?

 

OPTIONALOPTI

Make sure to complete the channel scan before turning off the unit.

How come the Initial setup

Connect the RF coaxial cable to the unit directly and run the initial setup.

 

appears every time I turn on

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SETTINGTING

 

 

to a location where previously unavailable channels are broadcast.

 

• Make sure [Autoprogram] has been completed. p.19

 

 

• Autoprogram must be completed when you set up the unit for the first time or move it

 

 

• The selected channel may not be broadcasting.

 

 

 

 

ITROUBLESHOOTING

Why I cannot watch some RF

When [Autoprogram] is interrupted and not completed, some channels will not be

signal TV programs.

 

received. Make sure to complete. p.19

 

 

The selected channel cannot be viewed by the [Child Lock] setting. p.27

 

 

• The unit requires some kind of antenna input. An indoor antenna

 

 

 

(VHF /UHF), an external antenna (VHF /UHF) or an RF coaxial cable from your wall

 

 

 

cable/satellite box needs to be plugged into the unit.

 

 

Check if the right input mode is selected by pressing SOURCE or using CH ▲/▼.

 

 

 

How come there is no image

 

[Switching Each Input Mode] p.16

INFORMATION

 

 

 

 

 

 

Check the antenna or cable connection to the unit.

from the connected external

When using the Component Video Connection check that the Green (Y), Blue (Pb/Cb)

 

devices?

 

 

and Red (Pr/Cr) connectors are connected to their corresponding colored jacks on the

 

 

 

 

 

 

unit.

 

 

 

 

 

 

 

 

 

 

 

• Many digital channels have alternate channel numbers.

 

Whenever I entered channel

 

The unit changes the numbers automatically to the ones signifying the broadcasting

 

 

 

number,

 

station channel number.

 

it changes automatically.

 

These basic numbers used for previous analog broadcasts.

 

 

 

(e.g., input ch#30 auto change to ch#6.1)

 

Why are captions not displayed entirely?

Or, captions are delayed behind the dialogue.

How can I set the clock ?

Captions that are delayed a few seconds behind the actual dialogue are common for live broadcasts. Most captioning production companies can display a dialogue to maximum of 220 words per minute. If a dialogue exceeds that rate, selective editing is used to insure that the captions remain up-to date with the current TV screen dialogue.

• There is no clock function on this unit.

31

EN

Page 39
Image 39
Sylvania LC320SL1 owner manual Troubleshooting, Question Answer