Sylvania LC320SS1 owner manual HDMI-DVI Connection, Component Video Connection

HDMI-DVI Connection

Use an HDMI-DVI conversion cable to connect the unit to external video devices equipped with DVI output jack.

English

Component Video Connection	INTRODUCTION
Component Video connection offers better picture quality for
video devices connected to the unit.

e.g.)
LC320SS1
To HDMI1
Input jack only
DVI
ANALOG
AUDIO
HDMI-DVI
conversion cable		audio cables
STEREO
PCM
cab e receiver or satellit		box
with the DVI outpu	jack
DVI OUT

rear of this unit

AUDIO OUT

LR

If you connect to the unit’s Component Video Input jacks,
connect audio cables to the Audio L/R Input jacks right beside
the Component Video connector.
e.g.)		PREPARATION
LC320SS1	rear of this unit
	DVI	WATCHING TV
	ANALOG
	AUDIO

	audio cables				OPTIONAL
	component video cables
	(red/blue/green)
AUDIO OUT		COMPONENT VIDEO OUT			SETTING
L	R	Y	Pb/Cb	Pr/Cr
	TITLE 5
	CHAPTER 15
	REPEAT A-B
	BD/DVD recorder with
	e component video output j

audio cables

HDMI-DVI conversion cable

T o HDMI1

Input jack only

rear of this unit

Note

For HDMI connection

•The unit accepts 480i, 480p, 720p and 1080i of video signals, and 32kHz, 44.1kHz and 48kHz of audio signals.

•This unit accepts only 2 channel audio signal (LPCM).

•You need to select "PCM" for the digital audio of the device you connected or check the HDMI audio setting.There may be no audio output if you select "Bitstream", etc.

•This unit accepts only signals in compliance with EIA861.

For HDMI-DVI connection

•The unit accepts 480i, 480p, 720p and 1080i video signals.

•HDMI-DVI connection requires separate audio connections as well and the audio signals are converted from digital to analog.

•DVI does not display 480i image which is not in compliance with EIA/ CEA-861/861B.

audio cables	component video	TROUBLESHOOTING
	cables
	(red/blue/green)
LC260SS1		INFORMATION
4 . 2T 2D	;
rear of this unit

Note

•The unit accepts 480i / 480p / 720p and 1080i of video signals for this connection.

11

EN