Sylvania LD195SSX owner manual 5Plug In the AC Power Cord, PC Connection, Resolution

PREPARATION

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store.

[PC Connection]

This unit is equipped with a PC input jack. If you connect this unit to your PC, you can use this unit as a PC monitor. Use an VGA cable for this connection and it requires stereo mini plug audio cable as well.

e.g.) rear of this unit

VGA cable

VGA cable should be with ferrite core.

personal computer				stereo mini-plug audio cable
The following signals can be displayed:
Format	Resolution	Refresh rate			Format	Resolution	Refresh rate
VGA	640 x 480		60Hz			1,280 x 768		60Hz
SVGA	800 x 600		60Hz		WXGA
						1,360 x 768		60Hz
XGA	1,024 x 768		60Hz

Other formats or non-standard signals will not be displayed correctly.

Note:

•Please purchase the VGA cable that has a ferrite core.

•The following operations may reduce noise.

-Attach a ferrite core to the AC power cord of your PC.

-Unplug the AC power cord and use the built-in battery of your PC.

5Plug In the AC Power Cord

Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connection is completed.

rear of this unit

AC power cord

AC outlet

Caution:

•Do not connect the AC power cord to a power supply outside the indicated voltage of this unit (AC 120V). Connecting the AC power cord to a power supply outside of this range may result in fire or electrical shocks.

Note:

• Each time you plugged in the AC power cord, any operations will not be performed for a few seconds. This is not a malfunction.

14

EN