Sylvania SRCD427P Automatic Clock Setting, To Change Clock Setting, Please Note, Make sure

5 Select the year	– MANUAL CLOCK SET –
Press the Arrow button K or L	MONTH DAY			YEAR
	0 5	/ 0 6	THU	2 0 0 4
until your desired year appears.
(Example: 2004)	HOUR	MINUTE
	– –	: – –	– –
Then press the Arrow button B.
6 Select the hour	– MANUAL CLOCK SET –
Press the Arrow button K or L	MONTH DAY			YEAR
until your desired hour appears.	0 5	/ 0 6	THU	2 0 0 4
(Example: 5, PM)	HOUR	MINUTE
Then press the Arrow button B.	0 5	: – –	PM
7 Select the minute	– MANUAL CLOCK SET –
Press the Arrow button K or L	MONTH DAY			YEAR
until the desired minute appears.	0 5	/ 0 6	THU	2 0 0 4
(Example: 40)	HOUR	MINUTE
	0 5	: 4 0	PM

AUTOMATIC CLOCK SETTING

Make sure ...

•The unit is turned on.

•Confirm the unit is receiving a RF (Radio Frequency) signal from either an antenna or cable system connection using the ANT. terminal on the rear of the unit.

NOTE:

•If a cable converter box is being used, make sure it is powered on.

•You must use the TV/VCR/DVD remote control to perform the clock setting procedure.

•If the unit is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself and the unit must be set to the output channel of the cable converter box or satellite box (usually channel 3 or 4), to be able to set up or correct the clock automatically.

8 Start the clock	5:40 PM
Press the SETUP button on the
remote control.

Although seconds are not displayed, they begin counting from 00 when you press the SETUP button on the

1Select “SETTING CLOCK”

Press the SETUP button on the remote control.

Press the Arrow button K or L to select “SETTING CLOCK”. Press the ENTER button to enter “SETTING CLOCK” menu.

TV/VCR SETUP -

TIMER PROGRAMMING

BSETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH INDEX SEARCH

remote control. Use this feature to synchronize the clock with the correct time.

NOTE:

When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock.

TO CHANGE CLOCK SETTING

If you want to change the clock, 1)Follow steps [1] to [2].

2)Select where you want to change using the Arrow button B.

3)Enter correct numbers using the Arrow button K or L.

4)Press the SETUP button on the remote control to start the clock.

PLEASE NOTE:

If there is no local PBS (Public Broadcast Station) in your area or on your cable system, select “AUTO CLOCK” and press the ENTER button to turn [OFF] this function. Then you can manually adjust the clock.

2 Set “AUTO CLOCK” to [ON]	– SETTING CLOCK –
Press the Arrow button B until	B AUTO CLOCK	[ON]
“AUTO CLOCK [ON]” appears.	AUTO CLOCK CH SEARCH
	MANUAL CLOCK SET	[ 02 ]
	AUTO CLOCK CH
	D.S.T.	[OFF]

3Begin “AUTO CLOCK CH SEARCH”

Press the Arrow button L to select	– SETTING CLOCK –
“AUTO CLOCK CH SEARCH”.	AUTO CLOCK	[ON]
Press the ENTER button.
	AUTO CLOCK CH	[ 02 ]
	B AUTO CLOCK CH SEARCH
• The unit is now searching for the	MANUAL CLOCK SET
	D.S.T.	[OFF]
station which contains the auto
clock signal. The search for a sig-
nal may take up to 20
seconds per channel.
• “_ _” appears at the lower left of	– AUTO CLOCK CH SEARCH –
the screen when the search has	08 10 13
ended.

• Auto Clock station(s)- write down the number(s) that appear

_ _

on the screen. These are the auto

clock station(s) in your area. See step [4] on page 17.

•If no number(s) appear on the TV screen, there are no stations in your area which contain the Auto Clock signal. Auto Clock Setting is not possible. Please use Manual Clock Setting on page 15.

Press the SETUP button to exit the screen.

- 16 - EN

1C29