Sylvania SRCD427P Connecting To An Amplifier/Receiver With A Dolby, DIGITAL DECODER for DVD

CONNECTING TO AN AMPLIFIER/RECEIVER WITH A DOLBY

DIGITAL DECODER (for DVD)

To use this unit to play a DVD disc in a 5.1 channel Dolby Digital surround format, the unit can output a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the unit up to a Dolby Digital decoder, you can enjoy high-quality surround sound as enjoyed in movie theaters.

Use audio coaxial digital cables available at retail stores for the audio connection.

Center

speaker

Front speaker (left)

Amplifier/Receiver with

Dolby Digital decorder

Surround

speaker (left)

Front speaker
(right)
To COAXIAL DIGITAL		DIGITAL AUDIO OUT
		COAXIAL
AUDIO INPUT jack
Surround	Subwoofer
speaker
(right)
		[Fig. 7]

NOTES:

•Be sure to turn off the power to all components in the system before connecting them together.

•Refer to the Owner's Manuals for the components to be connected to the unit.

•If connected to receiver with a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode. (See page 45 to set DOLBY DIGITAL to ON.)

•

•

Unless connected to a receiver with a Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio out- put in the setup mode. Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers.

Only DVD, CD, MP3 sound is available using this jack.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

- 14 - EN

1C29