Sylvania SRCD427P owner manual Connecting to Front A/V Input Jacks, Installing the Batteries

TO RECORD A SCRAMBLED/UNSCRAM- BLED CHANNEL

1.Set the unit channel selector to the output channel of the Cable Converter Box or Satellite Box. (Ex. CH3)

2.Select the channel to record with your Cable Converter Box or Satellite Box.

Note to CATV system installer:

This reminder is provided to call the CATV sys- tem installer’s attention to Article 820-40 of the NEC that provides guidelines for proper ground- ing and in particular, specifies that the cable ground shall be connected to the grounding sys- tem of the building as close to the point of cable entry as practical.

CONNECTING TO FRONT A/V

INPUT JACKS

When you watch a program recorded on an another source (VCR, video camera, video game system), use the audio/video input jacks on the front of the unit. Connect the audio/video output jacks of another source to the AUDIO L/R and VIDEO jacks of this unit.

Then press the CHANNEL button K or L until “AUX” appears on the TV screen.

NOTE:

•When you connect a monaural VCR (another source) to this unit, connect the Audio output jack of the monaural VCR (another source) to the AUDIO L jack of this unit. The audio will output in both L and R channel equally.

	To the audio
	output jacks
[Another source]
	HEADPHONE VIDEO	L AUDIO R
	Audio/Video
	cables
	(not supplied)
etc.
To the video	[Front of the
	TV/VCR/DVD]
output jack

[Fig. 5]

INSTALLING THE BATTERIES

1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.

2)Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings.

3)Replace the cover.

- 12 - EN

1C29