Talkswitch TS-100 instruction manual Headset Compatible, Data Port, Call Waiting Display

Telephone Features

HEADSET COMPATIBLE

This telephone will accept a 2.5mm cell phone-style headset or an RJ-type headset. To enable headset mode, move the switch on the right side of the phone (see Page 7 for switch location) to the ON position. The SPEAKERPHONE button is used to connect or disconnect from a call.

Note: With the headset switch turned to the ON position, the speakerphone feature will be disabled.

DATA PORT

This is a connection which is in parallel with the telephone line. It allows the connection of a device such as a modem, caller ID, or an answering machine.

CALL WAITING DISPLAY

CALL WAITING SYMBOL

PM 8:59	+9	9/24	CALL#	36
			NEW

555-1234

JACK SMITH

Call Waiting Caller ID tells you there is another call waiting, and lets you know who the caller is before you answer it. The call waiting information will be shown on the unit’s display.

The CALL WAITING (CW) symbol will flash for 16 seconds along with the telephone number and name of the person who is on call waiting. If connected to TalkSwitch, press the FLASH button twice quickly to put the existing call on hold and answer the new call.

Note: It is recommended that you do not use Call Waiting in conjunction with TalkSwitch as it is impossible for the system to handle a second call automatically while the 1st call is being handled by the system.

7 TS-100 Owner’s Manual