S A V E
PA U S E
D E L ET E

T S - 6 0 0 U S E R G U I D E

DELETING ENTRIES IN THE DIRECTORY

1. To delete an individual entry in the directory, press D E L ET E when the entry is displayed. The entry is permanently erased.

2. To delete all entries in directory, press and hold for 5 seconds when one of the directory entries is displayed. All entries are permanently erased.

PROGRAMMING A NEW PHONE NUMBER

To store a new number and name in the directory or for a speed dial key:

1. Press the S A V E button when the phone is idle.

2.Press the D I R E C TO R Y button or any one of the programmable buttons.

3.Use the keypad to enter the telephone number, including the long-distance prefix that you need to dial this number. Insert a pause or multiple pauses

where required by using the button.

4. Press

S A V E

to save the number.

Note: Do NOT include the outside line access code in the phone number you entered.

5.Use the keypad to enter the name. The number and letters on each telephone button are displayed in turn. When the desired character is displayed, you can enter the next character. If you have to use the same button to enter the next character, press X button to move the cursor to the next position and enter the next character. To insert a space, press X button to move the cursor to the right.

6. After entering all characters, press

S A V E .

While reviewing the call Log

• Pressing the softkey while viewing a call record will allow the user to automatically save the caller’s name and number to the directory or a speed dial key.

1 8

W W W.T A L K S W I T C H . C O M

Page 22
Image 22
Talkswitch TS-600 manual Deleting Entries in the Directory, Programming a NEW Phone Number, While reviewing the call Log