PARKING A CALL
Parking a call puts the call on hold in one of ten park orbits, and allows you or someone else in your office to retrieve the call from any phone.

T S - 6 0 0 U S E R G U I D E

CONFERENCING CALLS

When you are on a call, you can add another person to create a three-way call.

1.Press CO N F E R E N C E softkey to put the current call on hold.

2.Dial the number of the extension or phone number of the person you

 

would like to conference with and press the

O K

softkey. If you

 

have Direct Line Access enabled at your extension, you will first need to

 

dial 9 or another Hunt Group before dialing the second phone number.

3.

Once the person has answered, press the J O I N C A L L S

softkey to add the call

 

currently on hold to your conversation.

 

 

4.

If the number you dialed is busy or unavailable, you can press the

 

C A N C E L CO N F softkey to get re-connected to your call on hold.

1. Press the

PA R K

softkey to park the current call.

2.The system will respond by confirming the call is parked and will announce the park orbit. The orbit is between 500 and 509.

To retrieve a call that has been parked:

1.

From any phone, lift the handset or press the S P E A K E R button.

 

2.

Press the U N PA R K softkey, followed by the Park Orbit and the

O K

 

softkey. You will be connected to the call parked in the orbit specified.

PICKING UP A CALL

Call pick up allows you to answer a call ringing at someone else’s extension.

When another extension is ringing:

1.Lift the handset or press the S P E A K E R button.

2.Press the P I C K U P softkey.

3.Select “Pick up any call” to pick up the extension that is ringing.

4.Select the “Pickup specific extension” to pick up a call at a the specified extension. You will be connected to the incoming call.

Note: Pick up works only for incoming external calls.

W W W.T A L K S W I T C H . C O M

1 3

Page 17
Image 17
Talkswitch TS-600 manual Conferencing Calls, To retrieve a call that has been parked, Picking UP a Call