What’s in this guide?

Getting started

Making calls

Softbutton—Camera Preset

If you want direct access (via the softbuttons along the bottom line of the screen) to predefined camera presets, you should assign the function Camera preset to one or more of the softbuttons.

Note that camera presets must have been defined before you start assigning presets—see page 10 for more on camera presets.

In the following we will use Softbutton 1 as an example, but the function may be assigned to any of the five softbuttons.

Do as follows:

1.Navigate down to the softbuttons options as shown on page 34. Make sure you have decided whether your setting shall apply to idle or in call. If you want it to apply to both situations you must do this twice, one setting for each case—see the tip on page 34 for more on this.

2.Expand the Camera preset menu.

3.Use the vertical arrow keys to go between the presets existing.

Using the phone book

In-call features

AdvancedAdva

settingstings

 

 

 

 

4.Press the key to exit the menu putting changes into effect or the left arrow key to leave the menu going one step back.

Below is a screenshot showing how the softbuttons appear when assignments have been made.

D14503.01 USER GUIDE TANDBERG QUICK SET C20—July 2009

36

 

 

Page 36
Image 36
TANDBERG C20 PLUS manual Softbutton-Camera Preset