Advanced use | TANDBERG Videoconferencing System |
VGA Settings
NOTE
IF YOU SET ‘VGA OUT’ TO ‘MAIN’, MAKE SURE YOU HAVE A
NOTE
ICIF WILL NOT BE AVAILABLE WHEN VGAOUT IS MAIN OR DUAL.
VGA Out
To enhance the local video quality, a VGA monitor may be connected.
Main: Should be used if you want to use a VGA monitor as your main monitor. Video outputs 1&2 will be disabled.
Off: Should be used if you want to use a TV monitor as your main monitor.
VGA Out Quality
VGA Out Quality changes the resolution of the VGA signal available on the ‘VGA Out’ connector at the rear of the codec.
Auto Will sense the resolution on the ‘VGA input’ port and use the same resolution on the ‘VGA Out’ port. VGA Will force ‘VGA out’ to VGA(640X480).
SVGAWill force ‘VGA out’ to SVGA(800X600).
XGA Will force ‘VGA out’ to XGA(1024X768).
60
