TANDBERG D12817-05 General use, Adjusting volume, View outgoing video selfview, Microphone on/off

General use TANDBERG Videoconferencing System

General use

Adjusting volume

+Press the VOLUME keys to adjust the volume level. An on-screen indicator will show the current level.

-

View outgoing video (selfview)

selfview

Press the SELFVIEW key to view your outgoing video.

To change the image being viewed on the monitor during a call press SELFVIEW until the desired image is shown (far end/selfview/still image).

move pip

Press MOVE PIP to move your selfview as a Picture-in-Picture to different corners of the screen or to switch it off.

Microphone on/off

mic off To mute your microphone during a call, press MIC OFF. An on-screen indicator will appear when the microphone is off. In a call, if audio is detected, the on-screen symbol will start to flash. Pressing MIC OFF one more time will activate the microphone again.

Do Not Disturb / Sleep Mode

Press any Quick key when not in a call to activate the Quick Menu.

When Do Not Disturb is activated, the system will not accept any incoming calls. The caller will hear a busy tone when calling this unit. A status line will indicate when Do Not Disturb is active.

26