TANDBERG D12817-05 user manual System configuration, Menu

TANDBERG Videoconferencing System Installation

System configuration

•Switch the system on by activating the power switch on the system.

•After the system has performed a self-test routine, product logo and a ‘Welcome’ menu will be displayed on the monitor.

NOTE

THESE SETTINGS ARE ESSENTIAL FOR OPTIMAL SYSTEM SET-UP.

•Enabled but unused ISDN lines (lines not active) should be disabled. Select the Quick Key ‘System Info’ (on the remote control) to view line status.

menu

PRESS MENU ON THE REMOTE CONTROL. SELECT THE MENU ‘TERMINAL SETTINGS’, ‘ISDN SETTINGS’. SELECT THE RELEVANT ‘LINE SETUP’ MENU AND SET ‘ENABLED: OFF’.

•Enter System Name to identify the system during an MCU conference. Select ‘Utilities’, ‘System Name’ and enter the name using the number keys (as on a mobile phone).

•Select the language you want to use in ‘Terminal Settings’, ‘Language’.

•To activate a software option, enter an option key (see paperwork accompanying your system), see

‘Terminal Settings’, ‘Software Options’.

• Press CONNECT on the remote control. A dial tone should be heard if the network is active.

connect • Using the monitor remote control, adjust the volume on the monitor to a level of your choice. This volume will be the default volume for all calls.

15