Manuals / Tappan / Kitchen Appliance / Range

Tappan 316000182 To Set the Automatic Timer Timed Bake Feature, continued, Setting Oven Controls

Models: 316000182

1 20

Download 20 pages 14.03 Kb

Page 10

(continued)

Setting Oven Controls

(continued)

Use caution when using the automatic timer. Use the automatic timer when cooking cured or frozen meats and most fruits and vegetables. Foods that can easily spoil such as milk, eggs, fish, meat or poultry, should be chilled in the refrigerator first. Even when chilled, they should not stand in the oven for more than 1 hour before cooking begins, and should be removed promptly when cooking is completed.

To Set the Automatic Timer (Timed Bake Feature)

The BAKE TIME and STOP TIME controls operate the Timed Bake feature. The automatic timer will turn the oven on and off at the times you select in advance. The oven can be programmed to start immediately and shut off automatically or to begin baking at a later time with an automatic shutoff.

To Program the Oven to Begin Baking Immediately and To Shut Off Automatically:

1.Be sure that the clock shows the correct time of day.

2.Place the food in the oven.

3.Push.

4.Within 5 seconds, push the or . The display will show "350°F

(177°C)." By holding the or , the temperature can then be adjusted in 5°F (1°C) increments.

5.Push. "0:00" will flash in the display.

6.Push theoruntil the desired amount of baking time appears in

the display.

To Program Oven for a Delayed Start Time and to Shut-Off Automatically

1.Be sure that the clock shows the correct time of day.

2.Place the food in the oven.

3.Push.

4.Within 5 seconds, push the or . The display will show "350°F

(177°C)." By holding the or , the temperature can then be adjusted in 5°F (1°C) increments.

5.Push. "0:00" will flash in the display.

6.Push theoruntil the desired amount of baking time appears.

7.Push. The earliest possible stop time will flash in the display.

8.Push the oruntil the desired stop time appears in the display.

9.Once the controls are set, the control calculates the time when baking will

start in order to finish at the time you have set.

Once the Controls are Set:

a.The oven will come on and begin heating to the selected baking temperature.

b.The oven temperature will show in the display.

When the Set Bake Time Runs Out:

a."END" will appear in the display window and the oven will shut off automatically.

b.The control will beep 3 times every 60 seconds until is pushed.

To Change the Oven Temperature or Bake Time after Baking has Started:

1.Push the function pad you want to change.

2.Push theorto adjust the setting.

10

Image 10

Tappan 316000182 To Set the Automatic Timer Timed Bake Feature, continued, Once the Controls are Set

Contents

GAS RANGE SEALED SURFACE BURNERS WITH SELF CLEANING OVENAND ELECTRONIC OVEN CONTROL OWNER’S GUIDERegister Your Product FOR YOUR SAFETYProduct Registration Record Your Model and Serial NumbersSave these instructions for future reference Read all instructions before using this applianceIMPORTANT SAFETY INSTRUCTIONS IMPORTANT INSTRUCTIONS FOR CLEANING YOUR RANGE IMPORTANT SAFETY INSTRUCTIONScontinuedIMPORTANT INSTRUCTIONS FOR USING YOUR COOKTOP SELF-CLEANING OVENSINDICATOR READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. ForFEATURE CLEAN PADTo Change the Minute Timer while it is in use Setting the Clock and Minute TimerTo Set the Minute Timer To Cancel the Minute Timer before the set time has run outFlame Size Proper Burner AdjustmentsSetting Surface Controls To operate the surface burnerWarmer Drawer Recommended Food Settings Chart Setting Warmer Drawer ControlsIndicator Light SettingTo Set the Controls for Normal Baking Setting Oven ControlsTo Set or Change the Temperature for Normal Baking To Change the Oven Temperature after Baking has Startedcontinued To Set the Automatic Timer Timed Bake FeatureWhen the Set Bake Time Runs Out Once the Controls are SetRack Position From Top 5. Place the pan on the oven rack. Close the oven door when broilingTo Broil FoodStopping or Interrupting a Self-Cleaning Cycle Oven CleaningSelf-Cleaning Oven 1. Adhere to the following cleaning precautionsWhen the Self-Clean Cycle is Completed To Start the Self-Clean CycleTo Set the Controls for a Self-Clean Cycle Oven CleaningHow to Clean General CleaningCleaning Various Parts of Your Range SurfacesTo Remove the Burner Cap Assembly To Clean the CooktopTo Clean the Contoured Well Areas To Clean the Burner Base and Gas OpeningTo Remove Oven Door To Remove and Replace Oven DoorTo Remove and Replace Gas Warmer Drawer if equipped To Replace Oven DoorChanging Oven Light Adjusting Oven TemperatureTo Adjust Oven Temperature To Change the Oven Light some modelsSurface burner flame is orange POSSIBLE CAUSE/SOLUTIONOCCURRENCE Avoid Service ChecklistOven does not operate Self-Cleaning cycle does not workunder Oven Cleaning Not Operate see belowTAPPAN RANGE WARRANTY IF YOU NEED SERVICEYour Tappan product is protected by this warranty