Tappan 316000182 Control Pad Functions, The oven can be programmed to, For a silent control panel

Control Pad Functions	READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For
	satisfactory use of your oven, become familiar with the various functions of the
CLEAR PAD— Used to	oven as described below.

clear any function				CLOCK PAD— Used
previously entered		UP and DOWN ARROW PADS— Used along with the		to set the time of
except the time of day				day.
		function pads to select oven temperature, cooking
and minute timer. Push
		time, stop time (when programming an automatic		FEATURE
CLEAR to stop cooking.
		stop time), time of day, clean time and minute timer.		INDICATOR
BAKE PAD—Used to				LIGHTS— These
enter the normal				light to show which
baking mode				feature is in use.
temperature.
				BAKE TIME PAD—
BROIL PAD—				Used to enter the
Used to select				length of the
the variable				baking time.
broil function.				STOP TIME PAD—
CLEAN PAD—				Used to set the
				desired stop time
Used to select the	OVEN, PREHEAT & LOCK LIGHTS— The "OVEN"		TIMER PAD—	for baking. Can be
self-cleaning				used with BAKE
	light will glow each time the oven unit turns on to		Used to set or
cycle.				TIME to program a
	maintain the set oven temperature. The "PREHEAT"		cancel the minute
				delayed bake cycle.
	light will glow when the oven is first set to operate,		timer. The minute
	or if the desired temperature is reset higher than		timer does not
	the actual oven temperature. The "LOCK" light will		start or stop
	flash until the door locks when the self-clean cycle		cooking.
	is in use. It glows constantly after the door locks.

The oven can be programmed to:

•Bake normally

•Time bake

•Broil

•Self-clean

For a silent control panel:

When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed

for silent operation. Push and hold . After 7 seconds, the control will beep once. This will block the controls from

sounding when a pad is pushed. To return the sound, push and hold again for 7 seconds until 1 beep is heard. Note: The control will return to the audible mode after a power outage.

Temperature conversion:

The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (65°C to 287°C).

To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):

1.Push . "— — —" appears in the display.

2.Push and hold the until "HI" appears in the display.

3.Push and hold until °F or °C appears in the display.

4.Push the or to change °F to °C or °C to °F.

5.Push any function pad to return to normal operating mode. 5