Tappan 316000182 To Start the Self-Clean Cycle, To Set the Controls for a Self-Clean Cycle

Oven Cleaning

(continued)

Use care when opening

the oven door after the self-cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape.

To Start the Self-Clean Cycle

*We recommend a 2 hour self-clean cycle for light soils and a 3 hour cycle for average to heavy soils (to assure satisfactory results).

To Set the Controls for a Self-Clean Cycle:

1.Be sure the clock shows the correct time of day.

2.Push . "— — —" appears in the display.

3.Push the until "3:00" appears in the display for a 3 hour cycle, or push

the until "2:00" appears in the display for a 2 hour cycle.

4.As soon as the or is released, "CLn" appears in the display.

5.As soon as the controls are set, the motor driven lock will begin to close automatically and the "LOCK" indicator light will flash. DO NOT open the door while the light is flashing (it takes about 15 seconds for the lock to close).

6.The "LOCK" light will glow until the cleaning cycle is completed or cancelled, and the oven temperature has cooled.

When the Self-Clean Cycle is Completed:

1.The time of day will appear in the display window and the "LOCK" light will continue to glow.

2.Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened.

DO NOT force the oven door open. This can damage the automatic door locking system. Use caution when opening the door after the self-cleaning cycle is completed. The oven may still be VERY HOT.

13