General Cleaning
(continued)
The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down.
To Remove and Replace Oven Door
To Remove Oven Door:
1.Open the door.
2.Remove screws located on the inside of the oven door near the hinges A (one on each side.)
3.Close the door to the
4.To clean oven door, follow the instructions provided in the cleaning chart under General Cleaning
To Replace Oven Door: | ||
1. | Be sure the hinge arms are in the | |
| the hinges open by hand. The hinges may snap back against the oven frame | |
| and could pinch fingers. | |
2. | Hold the door at the sides near the top. Insert the hinge arms into slots at | |
| the bottom of the door. | |
3. | Hinge arms must go into the range slots evenly. The hinge arms should be | |
| inserted into the bottom corners of the door as far as they can go. | |
4. | If the door is not in line with the oven frame, remove it and repeat the above | |
| steps. | |
To Remove and Replace Gas Warmer Drawer (if equipped) | ||
To Remove Warmer Drawer: | ||
1. | Turn power off before removing the warmer drawer. | |
2. | Open the drawer to the fully opened position. | |
3. | Locate glide lever on each side of drawer, pull up on the left glide lever and | |
| push down on the right glide lever (see figure 1). | |
5. | Pull the drawer away from the range. | |
To Replace Warmer Drawer: | ||
1. | Pull the bearing glides to the front of the chassis glide (see figure 2). | |
2. | Align the glide on each side of the drawer with the glide slots on the range. | |
3. | Push the drawer back into the range. | |
Figure 1 | Electrical Shock Hazard can occur and result in | |
serious injury or death. Disconnect appliance from electric | ||
| ||
| power before cleaning and servicing the warmer drawer. | |
Figure 2 |
|
16