Tascam BD-R2000 owner manual Troubleshooting

Others

Troubleshooting

Problem	Symptom	Action	Reference
			Page
Power does not turn on	The "HELLO" message remains	Press the [RESET] button on the front	(A page 13)
	displayed, and the unit does not start	panel.
	up.	If it does not start up, stop using this unit,
		unplug the plug from the power point, and
		bring it to the dealer or "Service Center".
"FAN LOCKED" is	The cooling fan motor is not working.	The cooling fan motor is spoiled. Remove	-
displayed on the display		the power plug from the power point, and
window of this unit		consult the dealer from which this product
		is purchased, or any nearby TASCAM
		Servicing Center.
Power turns off	The “AUTO POWER (OFF)” setting is	Change the “AUTO POWER (OFF)” setting	(A page 75)
automatically	set to “2 HOURS” or “6 HOURS”.	of “SETUP” to “OFF”.
	The temperature of this unit has rose,	Place this unit in an area with ventilation	-
	and operation has ceased for safety	if possible, and wait approximately 30
	purposes.	minutes for it to cool down.
The power turns on	The “HDMI-CEC” setting is set to “ON”.	Change the “HDMI-CEC” setting of	(A page 81)
automatically		“CONNECTION” to “OFF”.
Input cannot be	i.LINK connection is currently being	Cancel importing, or wait until the	(A page 37)
switched	established.	connection ends.
There are no video	Monitor only supports RGB input.	Set “HDMI --> DVI COLOR” in the setting	(A page 81)
images on the monitor		menu to “RGB FIX”.
	"HDCP ERROR" is displayed.	Use a monitor that supports HDCP.	-
	Video images may be distorted during	This is not a malfunction. Change the	(A page 80)
	reencoding/dubbing when the monitor	“HDMI OUTPUT RESOLUTION” to a value
	(TV) is connected to this unit using	other than “1080p” (e.g., 1080i) if you find it
	a HDMI cable, or when the screen	annoying.
	resolution is set to “1080p”.
Screen is distorted	Video images may be distorted during	This is not a malfunction. Change the	(A page 24)
	reencoding/dubbing when the monitor	“HDMI OUTPUT RESOLUTION” to a value
	(TV) is connected to this unit using	other than “1080p” (e.g., 1080i) if you find it
	a HDMI cable, or when the screen	annoying.
	resolution is set to “1080p”.
There is no audio sound	The “HDMI AUDIO OUTPUT” setting	Change the “HDMI AUDIO OUTPUT”	(A page 81)
	is set to “OFF”.	setting of “CONNECTION” to “ON”.
	The amplifier does not support	Use an amplifier that supports bitstream	(A page 78)
	“BITSTREAM” output.	output.
Dubbing cannot be	The title to be dubbed is copyright	Titles that are copyright-protected cannot	(A page 23)
performed	protected.	be dubbed. Select a title that is not
		copyright-protected.
	A finalized disc has been inserted.	Insert a disc that has not been finalized.	-
	The disc is not formatted.	Format the disc.	(A page 25)
	The SD card is write-protected.	Remove the SD card and remove the write	(A page 27)
		protect lock.
High-speed dubbing	Dubbing cannot be performed	Set “HIGH-SPEED DUBBING” in the	(A page 24)
cannot be performed for	and “SOME TITLES CANNOT BE	settings menu to “4:3” before recording or	(A page 77)
EP mode titles	DUBBED” is displayed when trying	importing in the EP mode.
	to perform high-speed dubbing of a
	EP mode title to a DVD-VIDEO mode
	disc.

99