Importing Data from a BD/ DVD to the HDD | Tascam BD-R2000 specification

Dubbing/Importing

Importing Data from a BD/ DVD to the HDD (Continued)

•Importing of titles starts according to the sequence in the created title list.

•After titles are successfully imported, a “DUBBING IS

COMPLETED” message appears on the monitor.

&7$$+0)+5%1/2.'6'&%10(+4/-

Note:

•“START” cannot be selected for the following cases.

•A title that cannot be dubbed has been selected

•HDD memory is insufficient

•The amount of titles in the HDD has reached the maximum amount

•A dubbing title list has not been created

When DVD-VIDEO is detected, a recording mode selection screen appears.

Follow the steps below to import DVD-VIDEO to the HDD.

1Select “RECORDING MODE”, press the [OK] button, and select “RECORDING MODE” from the recording mode selection screen

• Select the “RECORDING MODE” option.

For more details, refer to "Recording Modes" (A page 28) .

• Importing of the titles starts.

• After titles are successfully imported, a “DUBBING IS

COMPLETED” message appears on the monitor.

&7$$+0)+5%1/2.'6'&%10(+4/-

•If the first play setting of the DVD-video has been set to top menu or other settings, the title will not playback.

If playback does not start, press the play button or playback the DVD-Video.

•Select “CANCEL” from the menu, and press the [OK] button to cancel importing of a title.

•Alternatively, you can press the [RETURN] button to cancel importing and return to the initial screen.

•Press the [OPTION] button to display the pop-up menu.

Select “CANCEL” from the pop-up menu and press the [OK] button. Data will be written onto the disc up to the point where import is cancelled.

•Importing will also be stopped when the [O] button is pressed to stop playback.