Set the COMMON MODE switch to OFF.
Select Deck 1 with the SELECT 1/2 key.

Section 5 : Recording

5-2. Dubbing

Dubbing means copying audio signals from Deck 1 to Deck 2.

ÉThe playback sound during dubbing is output from the ANALOG OUT and DIGITAL OUT connectors for Deck 1 and Deck 2.

áFor high-speed dubbing, signals are not output to the DIGITAL OUT connectors.

When high-speed dubbing is performed for a tape recorded in the Long Play mode, no signal is output to the ANALOG OUT connector as well.

5-2-1. Making an identical tape including sub- codes

1 Load the source tape in Deck 1 and the recording tape in Deck 2.

2 Set the COMMON MODE switch to OFF.

3 Select the Dubbing mode with the DUB MODE key.

áFor dubbing at high speed (2 times normal speed), select DUB MODE HIGH and for dubbing at nor- mal speed, select DUB MODE NORM.

áA tape recorded in the Long Play mode can be dubbed at high speed (4 times normal speed).

4 When the DUBBING key is pressed, the tapes in Deck 1 and Deck 2 are rewound, then dubbing starts.

ÉTo stop dubbing in the middle, press the STOP key on Deck 1 or Deck 2.

5-2-2. Dubbing a tape from the middle

1 Set the COMMON MODE switch to OFF.

2 Select the DUB MODE APPEND with the DUB MODE key.

5-2-3. Making a tape with the program order changed

1

2

3 Follow the procedure in "6.6 Program playback" to select the programs to be dubbed.

4 Set the Dubbing mode to DUB MODE PGM with the DUB MODE key.

5 Pressing the DUBBING key rewinds the tape in Deck 2 to the beginning of the tape, then starts dubbing according to the program.

ÉTo stop dubbing in the middle, press the STOP key on Deck 1 or Deck 2.

ÉWhen the AUTO ID mode is engaged, a Start ID is automatically recorded at the start of each program to be recorded.

3 Press the DUBBING key to start dubbing from that point.

16

Page 15
Image 15
Tascam DA-302 owner manual Recording Dubbing, Making an identical tape including sub- codes, Dubbing a tape from the middle