Tascam DA-302 Posi1 0Á13ª45£09, Posi1 0Á13ª45£19, Skip ID, Posi1 0Á13ª45£14, Posi1 ÐÁÐЪÐУÐÐ

Section 7 : Recording/editing of subcode data

5 When the PLAY key is pressed, playback takes place for about 3 seconds from the captured ABS time. Then, the Play-Pause mode is engaged.

áIn this status, press the UP and DOWN keys simul- taneously or press the CLEAR key on the remote control unit to restore the condition in step 3.

6 Each time the UP key or DOWN key is pressed in the Play-Pause mode, the captured ABS time can be changed by +5 frames or -5 frames (up to ±2 seconds).

Posi1 0Á13ª45£09

ÞDOWN key

Posi1 0Á13ª45£14

õUP key

Posi1 0Á13ª45£19

7 Repeat steps 5 and 6 to set the desired point, then press the EXECUTE key. The Start ID is recorded from that point.

7.2.3 Erasing the Start ID

1 Select the deck with the SELECT 1/2.

2 Press the ID MODE key so that "START ERASE" lights in the display.

3 In the Stop or Play mode, press the EXECUTE key. The tape is rewound to the previous Start ID and this Start ID is erased while it is being played.

During erasing, the "START ERASE" blinks and when erasing is complete, the normal playback is restored.

7-3. Skip ID

Skip IDs are recorded to enable skip playback (œp.18).

7-3-1. Recording the Skip ID

ÉRecording on the fly

1 Select the deck with the SELECT 1/2 key.

2 Press the ID MODE key so that the "SKIP WRT" lights on the display.

3 During recording or playback, press the EXECUTE key at the point where you want to record the Skip ID. The "SKIP WRT" blinks and the Skip ID is recorded for one second from that point.

áWhen the COMMON MODE switch is set to "1&2", the Skip ID is recorded on tapes in both Deck 1 and Deck 2 regardless of the setting of the SELECT 1/2 key.

ÉRecording with the menu

1 Select the deck with the SELECT 1/2 key.

2 Press the ID MODE key so that the "SKIP WRT" lights on the display.

3 Press the MENU key to show the following menu in the time display.

Posi1 ÐÁÐЪÐУÐÐ

4 Press the RESET key during playback to capture the current ABS time. The time is shown in hours, min- utes, seconds and frames in the time display. Then, the deck enters the Play-Pause mode.

Posi1 0Á13ª45£14

5 Press the PLAY key to play back the tape from the cap- tured ABS time for about 3 seconds. Then the Play- Pause mode is engaged.

áIn this status, press the UP and DOWN keys simul- taneously or press the CLEAR key on the remote control unit to restore the condition in step 3.

6 Each time the UP or DOWN key is pressed in the Play- Pause mode, the captured ABS time is changed by +5 or -5 frames (up to ±2 seconds).

Posi1 0Á13ª45£09

ÞDOWN key

Posi1 0Á13ª45£14

õUP key

Posi1 0Á13ª45£19

21