Tascam DA-302 owner manual Playback, Skip1 Off, Single1 Off, Normal playback, Continuous playback

Set the COMMON MODE switch to "1 > 2".

Set "Seqtime" in the menu. (œp.28)

Section 6 : Playback

6-1. Normal playback

1 Set the COMMON MODE switch to OFF.

2 Press the PLAY key to start playback.

ÉWhen the REW key (F FWD key) is pressed during playback, 2 times (3 times) normal speed rewind cueing (fast-forward cueing) is performed. Pressing it once more allows 4 times (6 times) normal speed cueing. Pressing it once more restores 2 times (3 times) cueing. To restore normal playback, press the PLAY key.

ÉHolding the REW key (F FWD key) pressed for 1 sec- ond or more during playback performs 2 times (3 times) normal speed rewind (fast forward) cueing for as long as the key is pressed. Releasing it restores normal play- back.

ÉPressing the REW key during fast-forward cueing switches to 2 times normal speed rewind cueing.

ÉPressing the F FWD key during rewind cueing switches to 3 times normal speed fast-forward cueing .

ÉPlayback signals are output from the ANALOG OUT and DIGITAL OUT connectors of Deck 1 (Deck 2).

6-2. Continuous playback

With continuous playback, the tapes in Deck 1 and Deck 2 are played back continuously.

1

2

3 Press the PLAY key on Deck 1 to start playback. When the ABS time of Deck 1 reaches the time set with "Seqtime", Deck 2 starts playback automatically.

4 Deck 1 automatically rewinds the tape to the beginning either 3 minutes after the time set with "Seqtime" or when the tape end is reached.

5 Deck 2 automatically rewinds the tape to the beginning either 3 minutes after the time set with "Seqtime" or when the tape end is reached.

ÉThe playback signals are output from the ANALOG OUT and DIGITAL OUT connectors of Deck 1 (Deck 2).

ÉThe playback sound can also be monitored through the ANALOG CASCADE OUTPUT connectors. When "Cas Out" is set to "Auto" in the menu (œp.28), play- back sound output is switched from Deck 1 to Deck 2 at the time Deck 2 starts playback. In this status, if the PLAY key of Deck 1 is pressed, you can monitor the playback sound of Deck 1 again.

6-3. Skip playback

When a Skip ID is detected during playback, the tape is fast-forwarded to the next Start ID and resumes playback.

1 Select the deck with the SELECT 1/2 key.

2 Press the MENU key to show the following menu in the time display.

Skip1 Off

3 Set to "On" with the UP/DOWN key to engage the Skip Play mode.

ÉIf the STANDBY key is set to ON, the Play-Pause mode is engaged at the Start ID.

6-4. Single playback

When a Start ID is detected during playback, this function automatically engages the Play-Pause mode.

1 Select the deck with the SELECT 1/2 key.

2 Press the MENU key to show the following message in the time display.

Single1 Off

3 Set to On" with the UP/DOWN key to engage the Single Play mode.

18