Section 5 | Important: To the Operator |
|
|
Viscosity Adjustment
The viscosity (thickness) of the slush can be adjusted by turning the viscosity adjustment screw on the upper right side of the front panel. Turn the viscosity adjustment screw clockwise for a thicker product, or counterclockwise for a thinner product. After making an adjustment, allow the refrigeration system to cycle 2 or 3 times to accurately evaluate the viscosity.
Figure 1
Power Switch
The center position is “OFF”. The “up” position is “AUTO”, which activates the beater motor and the refrigeration system. The “down” position is “WASH”, which activates the beater motor only.
Figure 2
Reset Button
The reset button is located in the rear panel. The reset protects the beater motor from an overload condition. If an overload occurs, the reset mechanism will trip. To properly reset the freezer, place the power switch in the “OFF” position. Press the reset button firmly. Place the power switch in the “WASH” position and observe the freezer’s performance. Once satisfied, place the control switch in the “AUTO” position.
Figure 3
IMPORTANT: Do not use metal objects to press the reset button.
Indicator Light - “Mix Low”
A mix level indicating light is located on the front of the machine. When the light is flashing, it indicates that the mix hopper has a low supply of product and should be refilled as soon as possible.
Indicator Light - “Mix Out”
A mix out indicating light is located on the front of the machine. When the light is flashing, it indicates that the hopper is empty and the mix supply needs replenishing. To prevent damage to the unit, refrigeration discontinues automatically when the mix out indicator lights.
Important: To the Operator | 10 | Model 430 Torque |
