19
Model C006 Operating Procedures
Section 5 Operating Procedures

Assembly and Start Up

Step Action
1Plug the machine into an approved receptacle. The power
indicator will illuminate on the front of the dispenser.
2Open the front door to the dispenser.
3Remove all tanks and lids.
ALWAYS FOLLOW LOCAL HEALTH CODES!

Cleaning/Sanitizing

Step Action
1Prepare a sink with an approved 100 PPM
cleaning/sanitizing solution (example: Kay-5® or Stera
Sheen®). USE WARM WATERAND FOLLOW THE
MANUFACTURER'S SPECIFICATIONS.
2Thoroughly wash, rinse, and sanitize all tanks and lids in
the sink.
3Prepare 3 cleaning containers with an approved 100 PPM
cleaning/sanitizing solution.
4Place one container on each shelf with product tubes in the
containers.
5Prepare another cleaning container of cleaning/ sanitizing
solution.
6Place the sugar feed tube in the cleaning/sanitizing
solution.
7Press the CLEAN/CAL button. The screen will prompt the
operator to enter the access code. Use the size buttons to
enter the code as follows: 3 (MED) 2 (SM) 1 (X-SM).
8Upon entry, the screen will read “CLEAN PRESS FLVR”.
9Press the CLEAN/CAL button once to display“CLEAN ALL
<1>”.