17
Model C722 Important: To the Operator
Standby Symbol
During long “No Sale” periods, the unit can be
placed into the Standby mode. This maintains
product temperatures below 40°F (4.4°C) in both t he
hopper and the freezing cylinder, and helps prevent
overbeating and product breakdown.
To activate Standby, select the STANDB Y key or
enter the access code for the Manager Menu and
select the Standby Mode option (see pages 19 and
22). The STANDBY symbol will illuminate,
indicating the Standby feature has been activated.
Note: To resume normal operation, press the
AUTO symbol . Whent heunit cycles off, the
product in the freezing cylinder will be at serving
viscosity.
Wash Symbol
The WASH symbol will illuminate when it is
touched. This indicates beater motor operation. The
STANDBY or AUTO modes must be cancelled first
to activate the WASH mode.
Auto Symbol
The AUTO symbol willilluminate when it is
touched. This indicates that the refrigeration system
has been activated. In the AUTO mode, the W ASH
or STANDBY functions are automatically cancelled.
Note: An indicating light and an audible tone will
sound whenever a mode of operation has been
selected. To cancel any function, touch the k ey
again. The light and the mode of operation will shut
off.
Topping Heater Symbols
The TOPPING HEATER symbols are not functional
on the Model C722.
Reset Mechanism
The reset buttons are located in the left side panel of
the machine. They protect the beater motor s from
an overload condition. Should an overload occur, the
reset mechanism will trip. To properly reset the
freezer, place the power switch in the OFF posit ion.
Press the reset button firmly. Turn t he power switch
to the ON position. Touch the WASH symbol and
observe the freezer's performance.
WARNING: Do not use metal obj ects to
press the reset button. Failure to comply may
result in severe personal injury or death.
If the beater motor is turning properly, t ouch the
WASH symbol to cancel the cycle. Touch the
AUTO symbol toresume normal operation. If the
freezer shuts down again, contact your authorized
service technician.
Adjustable Draw Handle
This unit features an adjustable draw handle to
provide the best portion control, giving a better,
consistent quality to your product and controlling
costs. The draw handle should be adjusted to
provide a flow rate of 5 to 7-1/2 oz. (142 to 213 g.)
of product by weight per 10 seconds. To INCREASE
the flow rate, tighten the screw. To DECREASE the
flow rate, loosen the screw. (See Figure 8.)
Figure 8