24 Model C722Important:To the Operator
The SYSTEM INFORMATION is displayed on three
separate screens. The first screen cont ains the
control and software version installed in the
machine. (See Figure 34.)
SOFTWARE VERSION
C722 CONTROL UVC4
VERSION V00.00.000
> Next
Figure 34
Touch the SEL symbol to advance to the next
system information screen containingthe software
language version. (See Figure 35.)
Language
V3.00 English
> Next
Figure 35
Touch the SEL symbol to advance to the third
system information screen containing the model bill
of material and machine serial number. Touching the
SEL symbol again will return to the Manager's
Menu. (See Figure 36.)
B.O.M. C700000000
S/N K0000000
> Next
Figure 36
The CURRENT CONDITIONS screen displays the
current viscosity, and the hopper and barrel
temperatures. Press the SEL or MENU sym bols to
return to the Manager's Menu. (See Figure 37.)
VISC 0.0 0.0
HOPPER 41.0 41.0
BARREL 41.0 41.0
Figure 37
The NET SERVICE PIN screens allows the
Manager to initialize a network connection for
networking kitchens. (See Figure 38.)
NET SERVICE PIN
ARE YOU SURE?
Yes
>No
Figure 38
Use the arrow symbols to move the arrow up or
down. Pressing the SEL symbol with the arrow next
to “No” will return to the Manager's Menu. Pressing
the SEL symbol with the arrow next to “Yes” will
connect to the network if a gateway card is
connected.
Note: If “Yes” is selected, it may take a few
moments for the memory to clear and the default s to
load. The display may show the message
“COMMUNICATIONS FAILURE” during t his time.