14 Model C043Operating Procedures
Section 6 Operating Procedures
This machine is a three flavor custard freezer. It has
three 30 quart (28 liter) hoppers. The mix flows by
gravity through an adjustable flow control into the
freezing cylinders. This unit has been designed to
produce a rich tasting custard product that can be
drawn off and served from a holding cabinet. The
overrun is typically 20-25% and varies depending on
the mix formulation and the finished product
temperature (18 to 21°F [-7.8 to -6.1° C]).
We begin our instructions at the point where we find
the parts disassembled and laid out to air dry from
the previous brush cleaning.
The following procedures will show you how to
assemble the parts into the freezer, sanitiz e them,
and prime the freezer with fresh mix.
If you are disassembling the freezer for the fir st time
or need information to get to this starting point inour
instructions, turn to “Disassembly” on page 35 and
start there.

Assembly

MAKE SURE THE BEATER MOTOR
SWITCH IS IN THE “OFF” POSITION. Failure to
follow this instruction may cause severe personal
injury to fingers or hands from hazardous moving
parts.

Beater Shaft, Scraper Blade,and Feed

Tube Assembly

Step 1
Verify that the refrigeration switch and t he beater
motor switch are both in the “OFF” posit ion.
Figure 5
Step 2
Place a bead of lubricant around the groove of the
beater shaft.
Figure 6