41
Model C043 Important: OperatorChecklist
Section 8 Troubleshooting Guide

PROBLEM PROBABLE CAUSE REMEDY PAGE

REF.

1. The product is too stiff. a. Flow rat e is too slow. a. Adjust the flow rate. 21
2. The scraper blades make
a chattering noise. a. F low rate is too slow. a. Adjust the f low rate. 21
3. The product is too soft. a. Flow rate is too fast . a. Adjust the flow rate. 21
b. There is a problem with
the refrigeration system. b. Call an authorized service
technician. ---
4. The mix low indicator is
illuminated. a. Inadequate level of mix in
the mix hopper. a. Fill the m ix hopper with
mix. 21
b. Bad electrical connection. b. Call an aut horized service
technician. ---
5. The mix low indicator is
illuminated and the
product is too stiff.
a. The level of mix in the mix
hopper is inadequate and
the flow rate is too slow.
a. Fill the hopper with mix if
further production is
required. If no further
production is required,
open the flow control all
the way and place the
refrigeration switch in the
“OFF” position.
21 / 23
6. Beater motor won't start. a. The beater motor overload
has tripped. a. Turn the machine off.
Press the reset button and
restart the machine.
---
b. The power switch is in the
OFF position. b. Place the power switch in
the ON position. ---
c. The beater motor switc h is
in the OFF position. c. Place the beater motor
switch in the ON position. ---
d. The circuit breaker is off
or the fuse is blown. d. Turn the breaker on, or
replace the fuse. ---