14 Models QS10 & QS22Important: To the Operator
Note: The CALIBRAT screen is the base
maintenance screen. All other maintenance
functions are accessible through the CALIBRAT
screen.
Step 1
Press the MENU key to display the current
temperature scale:
SCALE F or C
Step 2
Fahrenheit is the desired temperature scale. (If
Celsius is desired, press the UP arrow to display
SCALE C.)
Step 3
Press the MENU key to return to the SCALE
message.
Step 4
If desired, the names of specific products can be
programmed to appear on the display instead of
ITEM numbers. While at the SCALE message
display, press the UP arrow to display the NAMES
message.
NAMES
Step 5
While at the NAMES message display, press the
MENU key and the message “NAME1” will appear
on the display. This message indicates that the
operator can program a specific product name to
appear for the first item on the menu.
NAME1
Step 6
Press the MENU key again, and the message
“ITM1” will appear on the display. The letter “I” will
be flashing above the cursor.
ITM1
Step 7
Using the UP and DOWN arrow keys, enter the
desired letter (A - Z) or number (0 - 9) ( - _ ). Once
the character letter is entered, press the MENU key
to move the cursor to the next position. Up to four
characters may be entered.
BURG
Step 8
After the last character has been entered, press the
MENU key to return to the message “NAME1”.
Step 9
Use the UP arrow key to display the message
“NAME2”.
Repeat steps 6-9 until all desired item names have
been entered.
Step 10
After entering the desired characters in the NAMES
screens, the control will return to “NAME1”.
Press the DOWN arrow to display “NAMES”.