10 Models RD30/RC25Important: Tothe Operator
Section 5 Important: To the Operator
Figure 1

Control Switch

The control switch is located on the front of the
machine. The center position is “OFF ”. The down
position is the “WASH” mode and activates the beater
motor only. The up position is the “AUTO” mode. T he
“AUTO” mode activates the beater motor and enables
refrigeration when the fill switch is in the “ON” position.

Fill Switch

The fill switch is located on the f ront of the machine.
The “ON” position enables refrigeration when the
control switch is in the “AUTO” position. The “O N”
position enables the fill module to replenish and
maintain product levels in the freezing cylinder and in
the hopper. The “OFF” position term inates the fill
function.The refrigeration system is disabled whent he
fill switch is in the “OFF” position.

Mix Out Light

A mix out indicating light is located on the front panel.
When the light is lit, it indicates that the hopper is
empty and the mix supply must be replenished. When
the indicator lights, refrigeration is autom atically
disabled to prevent component damage. The beater
motor continues to run.

Viscosity Control

The viscosity adjustment screw is located on t he front
of the unit. The viscosity (thickness) of the slush can
beadjusted by t urning the adjustment screw cloc kwise
for a thicker product or counterclockwise for a thinner
product.