Taylor TW-357 Factory Settings, Level Control, System, Temperature Control, Alarms, Logging

TW-357 REV E

Factory Settings

To restore factory settings at any time KRYOS can be re-initialized. Please note that a re-initialization clears all logs and passwords and resets settings to those listed in the table below. To reset factory settings in the control, go to the menu choice ABOUT THIS CONTROL. (MENU, 6, 4) and while looking at this screen type in 1973. The control will lead you through the process required to reset the factory settings.

Temperature:

Thermocouple #1 Enabled

Thermocouple #2 Disabled

Hi Temp #1 Alarm -100º C

Hi Temp #2 Alarm Disabled

Level Control:

OFFSET 0 inches

START FILL Sensor 3 inches STOP FILL Sensor 5 inches Sensor Assembly Freeze-Guard

System:

RS-232 Enabled Handshaking CTS/RTS Baud Rate 19200

Date & Time USA Central Time Brightness 100%

Lid Switch Enabled

Auto Defog Timer 20 seconds Quick-chill 15 seconds

Temperature Control:

Temperature Control Disabled

Temperature ºC

Temperature Range ±ºC

Alarms:

LN2 Supply Alarm 30 minutes Sensor Error Enabled Remote Alarm 30 minutes Lid Open Too Long 10 minutes Thermocouple Open Alarm Enabled

Logging:

Sensor Error Log Enabled

Low LN2 Enabled

Supply Log Enabled

Remote Alarm Log Enabled

Open Thermocouple Enabled

Hi Temp #1 Log Enabled

Hi Temp #2 Log Disabled

Fill Logging Enabled

Lid Open/Closed Log Enabled

User Access Log Disabled

Thermocouple #1 Rate Log Enabled

Thermocouple #2 Rate Log Disabled

Freeze-Guard:

Valve Open Duration Disabled

Valve De-icing Enabled

44