AAUX1/AUX2 jacks

These jacks transmit an analog 2-channel audio signal. Connect the components using commercially available RCA pin cables.

Make sure to connect the cables as follows: white plug qwhite jack (L: left channel)

red plug qred jack (R: right channel)

<Be sure to insert each plug securely. To prevent humming and interference, avoid bundling the signal interconnection cables together with the AC power cord or speaker cables.

BiPod Dock

Connect the Dock to the iPod port.

<Make sure the “SIDE A” label on the plug is facing down.

<Securely insert the plug until a slight “click” is heard.

To disconnect the Dock:

Squeeze both sides of the plug and pull.

<iPod dock is not supplied for this unit.

CVIDEO OUT terminal

This terminal outputs video signal from iPod.

Use a commercially available RCA pin video cable to connect the Dock to the composite video connector of a television or monitor.

DS-VIDEO OUT terminal

This terminal outputs video signal from iPod.

Use a commercially available S-Video cable to connect the Dock to the S-Video input of a suitably equipped television or monitor. Use this connection in preference to a composite video connection.

EDIGITAL OUT terminal (optical)

Digital 2-channel audio signal is output from this terminal.

Connect it to the digital input terminal of a digital device such as a CD recorder, MD deck, etc. Use a commercially available optical digital cable.

<

Remove the protective cap from the DIGITAL OUT

ENGLISH

 

 

terminal before connecting.

 

 

 

 

F AC Power Cord

After all other connections have been completed, connect the plug to an AC wall socket.

Be sure to connect the power cord to an AC outlet which supplies the correct voltage.

Hold the power plug when plugging or unplugging the power cord.

9