Parts of the Turntable
J
Before use, detach the stylus guard (white plastic cover) by pulling it straight off the front of the cartridge in the direction of the arrow.
ENGLISH
ATurntable
BScrew fixing the turntable for transportation
Before use, completely loosen the screw by turning it clockwise with a coin or screwdriver.
Side view of the screw for transport
During transport | During use |
(when shipped |
|
from the factory) |
|
When you transport the unit, turn the screw counterclockwise to secure the turntable.
C
Use this lever to lift the tone arm.
DTone arm holder
Gently push the clamper to the right to release the tone arm.
ESpeed selector
Select the speed suitable for the record.
FTone arm
When you move the tone arm to inside, the turntable will begin to turn.
GCassette tape operation button PLAY (y)
Use this button to play a tape. F.FWD (,)
Use this button to
Use this button to rewind a tape. STOP (H)
Use this button to stop playing a tape. PAUSE (J)
Use this button to suspend playing/recording temporarily.
Never press the PLAY button (y) and REW button (m) at the same time.
HCassette holder
Set a cassette tape with the exposed tape in front and the side to play facing up.
ITAPE switch
When playing a normal tape (type I), set the TAPE switch to NORMAL. When playing a chrome tape (type II) or metal tape (type IV), set the switch to HIGH.
J45 RPM adaptor
When playing a 45 RPM large hole single record, use the adaptor. Slide the part of holding the adapter to the side.
11