Programmed Playback
Up to 32 tracks can be programmed in the desired order.
<Insert a disc and select “CD” before beginning programming.
<Shuffle playback does not work during programmed playback.
<Programmed playback works with finalized discs only.
Press the PROGRAM button in the stop mode.
“PROGRAM” indicator and “P” blink on the display.
Press the . or / button to select a track.
track number
Press the PROGRAM button.
The track is programmed, and “P” stops blinking. If you select another track, “P” starts blinking again.
Repeat steps 
and 
to program more tracks.
<To select the same track consecutively, press the PROGRAM button again.
<You can program up to 32 tracks.
<To cancel the program mode, press the STOP button (H).
<You cannot select the track which does not exist in the disc.
When the selection of track numbers has been finished, press the PLAY/PAUSE button (y/J) to start program playback.
“PROGRAM” indicator stops blinking.
To check the programmed order
In the stop mode, press the . or / button repeatedly to show the track numbers that have been stored in memory.
To erase a track, press the CLEAR button when the number is displayed. After deletion, the next track number will be moved up.
18