Teac HD-P2 owner manual Important Safety Instructions, Trademarks

Important Safety Instructions

1Read these instructions.

2Keep these instructions.

3Heed all warnings.

4Follow all instructions.

5Do not use this apparatus near water.

6Clean only with dry cloth.

7Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11Only use attachments/accessories specified by the manufacturer.

12Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13Unplug this apparatus during lightning storms or when unused for long periods of time.

14Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

•Do not expose this apparatus to drips or splashes.

•Do not place any objects filled with liquids, such as vases, on the apparatus.

•Do not install this apparatus in a confined space such as a book case or similar unit.

•The apparatus draws nominal non-operating power from the AC outlet with its POWER switch in the off position.

•The apparatus should be located close enough to the AC outlet so that you can easily grasp the power cord plug at any time.

•An apparatus with Class I construction shall be connected to an AC outlet with a protective grounding connection.

Batteries

If batteries are used improperly, or if leakage or break- age occurs, the unit will not function. Please observe the cautions indicated on the batteries and their packaging to ensure proper usage.

When loading batteries into this product, remember the fol- lowing:

•When inserting batteries be sure of their direction (po- larity). Refer to the diagram inside the battery compart- ment.

•Do not combine batteries of different types or specifica- tions together.

•Do not use an old battery together with a new one. When necessary, change all batteries at the same time with a new set.

•If the product is not used over a lengthy period, remove the batteries to eliminate the possibility of battery leak- age which would result in damage to the unit.

•Do not attempt to recharge batteries that are non-re- chargeable.

CAUTION

When using the HD-P2, only use the AC adapter and cable supplied.

Do not use the supplied AC adapter and cable with any other product.

Trademarks

Windows and Windows XP are trademarks of Micro- soft Corporation.

Macintosh, MacOS 10.3 and higher, and FireWire are trademarks of Apple Computer.

Compact Flash is a trademark of SanDisk Corpora- tion.

Microdrive is a trademark of IBM Corporation.

TASCAM HD-P2 Owner's Manual