Audio Switches, Inputs & Outputs
Audio Switches
Located on top of the
The input switches (LINE/MIC) switch between the XLR and RCA jack inputs. The PAD switches only apply to signals coming in the XLR jacks.
Limiting can be turned on or off and the STEREO LINK switch enables stereo limiting of the left & right channels. When STEREO LINK is disabled, each channel has its own mono limiter.
Figure 3 -
Audio Switches
PHANTOM can be turned on to provide 48V phantom power to the microphone inputs.
MIC controls whether the left mic input is from the internal microphone or from the normal input source.
Turning on LOW CUT provides a
WARNING
Microphones should not be connected to or disconnected from the
Unbalanced dynamic microphones should never be connected to
Left Side
Figure 4 - Left Side Connectors
KEYBOARD – Accepts standard PS/2 keyboard. An external keyboard is useful for quickly renaming files and markers as well as remotely operating the transport.
FireWire – Connects the
TIMECODE IN – Standard female XLR input for linear timecode.
CLOCK IN/VIDEO REF – Word Clock/Video Input connec- tor: BNC (75 ohm) internal termination for 5V TTL word clock or 1.0Vpp composite, blackburst, or tri- level video sync.
DIGITAL IN – S/PDIF audio input RCA Jack. DIGITAL OUT – S/PDIF audio output RCA Jack.
PHONES – Standard 1/4 inch headset jack. Project set- tings control the type of headset monitoring (stereo, mono).
Right Side
Figure 5 - Right Side Connectors
LINE OUT L/R – RCA output jacks for analog output. LINE IN L/R – RCA input jacks for analog input.
DC IN – 12VDC input jack for use with the provided AC adaptor.
MIC/LINE – XLR input jacks for either line level or mic
level (selected by switch on top) input. A separate switch controls phantom power to the XLR inputs.
Compact Flash Slot – Type I/II Compact Flash slot (top left). Unmount Compact Flash (via menus) BE- FORE removing card to ensure file integrity.
TASCAM
