View settings

Displays the current network settings. You can check the setting of following items:

Active connection

MAC address

Wlan region

DHCP

SSID

IP address

Subnet mask

Gateway address

Primary DNS

Secondary DNS

Wlan region

Selects the region of the wireless LAN.

Manual settings

Sets the Internet connection manually. Follow to navigate of the menus.

Network profile

Displays the network profile.

Time/Date

Set Time/Date

To adjust the clock manually, use this menu. (See “Setting the Clock“ on the right).

Auto update

Select the auto update method.

Set format

Select the hour format.

When you select “Auto update“ to “Update from Network“, following menus appear.

Set timezone

Select your local time zone.

Daylight savings

Select the daylight savings status “ON“ or “OFF“.

Language

Select the desired language for display menus from the following:

English, Danish, Dutch, Finnish, French, German, Italian, Norwegian, Polish, Portuguese, Spanish, Swedish, Turkish

<If the unit is set to a foreign language and you find it impossible to read the menu settings, you can restore all the factory default settings, and the menus will appear in English again (all other settings will be cleared).

Factory Reset

If you want to restart from a known set of options, restore the unit to the factory settings.

To reset the setting, select “YES”.

<The unit completely erase all setting such as radio preset, WEP/ WPA codes and user setting.

Software update

Auto-check setting

Selects software update automatically or manually.

Check now

Executes the software update.

Setup wizard

See “Setup wizard” on page 10.

Info

Displays the current software version and Radio ID.

Setting the Clock

If you set “Main menu” w “System settings” w “Time/Date” w “Auto update” to “No update”, the clock need to be adjusted manually.

1 Press the CLOCK ADJ button.

Set Time / Date

01 - 01 - 2009

00:00

The “day” value blinks.

2 Press the Cursor botton (  / ) to set the current day, and then press the SELECT button.

Set Time / Date

04 - 01 - 2009

00:00

The “month” value blinks.

<You can also use the MULTI JOG instead of the Cursor button (/  ).

3 Repeat step 2 to set “month”, “year”, “hour” and “minute”.

When “minute” is set, the clock starts.

13