AFM antenna

Extend fully and position for the best reception.

Keep antenna away from metallic objects, electrical equipment and cords.

BETHERNET port

To enjoy the Internet radio and the Music player function, connect the unit to the broadband internet network.

This unit has both a built-in wireless LAN antenna and a ETHERNET port for wired internet connection.

Before you continue, make sure that your wireless access point is enabled and connected to your broadband Internet, or your LAN cable is connected correctly. For details of the system working, we recommend you to read the operating instructions supplied with the wireless access point and LAN connecting.

CPHONES

To listen with headphones, first lower the volume level to the minimum. Then, connect the headphones plug into the PHONES jack, and adjust the volume by pressing the Volume buttons (  /  ).

The speakers will make no sound when headphones are plugged in.

Caution:

Do not turn the unit on or off, or connect or disconnect headphones from this jack while wearing headphones. Ver y loud sound could be output from the headphones.

AVOID DAMAGING YOUR HEARING - Do not put on headphones until after plugging them in.

DAUDIO IN

You can connect a portable audio player to this jack.

EDC IN

Connect the supplied AC adapter (PS-M1220) to this jack. Then connect the connector of the power cord to AC adapter.

After all other connections are complete, connect the power cord's plug to the AC wall socket.

Caution:

Connect the supplied AC adaptor (PS-M1220).

Do not use any AC adaptors other than the one included with this unit.

Internet Connection

Using the wireless LAN

When you connect the power cord into the wall socket for the first time, select your region of the wireless LAN in “Setup wizard”. (page 10)

<A wireless access point (Wi-Fi) must be connected to your broadband Internet, preferably via a router.

<If your wireless network is configured to use Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA) data encryption, you need to know the WEP or WPA code to communicate with the network for getting the Internet radio.

<If your wireless network is configured for trusted stations you will need to enter the R-4iNT’s MAC address into your wireless access point. To find the R-4iNT’s MAC address, see page 12 to 13.

(“System Settings” w“Network” w“View settings” w“MAC address”)

<To enter the MAC address into your wireless access point, read the instructions supplied with the wireless access point.

Using the LAN

To use a wired Internet connection, connect the ETHERNET port of this unit to the ethernet network using a commercially available ethernet cable.

ETHERNET

<Make sure the internet environment is ready and the network settings is available for LAN (ADSL is highly recommended).

<To find the R-4iNT’s MAC address, see page 12 to 13.

(“System Settings” w“Network” w“View settings” w“MAC address”)

7