Teac R4-INT Listening to the FM Radio

This chapter describes how to listen to the FM radio.

1 Press the MODE button repeatedly to select “FM radio”.

radio

The last listened station is received.

<You can also use the FUNCTION button ( ˙ / ¥ ) on the remote control unit to select “FM radio”.

2 Automatic Tuning:

Press the SELECT button to begin automatic tuning.

When a station is found, the unit tunes in the station automatically. Repeat this step until the station you want to listen to is found.

<You can also use the SCAN button on the remote control unit to begin automatic tuning.

Manual tuning:

Turn the MULTI JOG until you find the station that you want to hear.

< You can also use the Cursor buttons ( / ) on the remote control unit to select a station.

Switching the stereo and monaural mode

1 In FM mode, press and hold the MENU button for more than 2 seconds to open the FM menu.

Hold down

more than 2 sec.

2 Turn the MULTI JOG to select “Audio setting”, and then press the SELECT button.

“Listen in mono only?” appears on the display.

< The current setting is marked with a “ ”.

3 Turn the MULTI JOG to select “YES” or “NO”, and then press the SELECT button.

FM stereo broadcasts are received in stereo.

<If the sound is distorted, the signal is not strong enough for good stereo reception. In this case, select “YES” to change to mono mode.

YES

Reception will now be forced into monaural, reducing unwanted noise. To compensate for weak FM stereo reception, select mono mode.