iPod/iPhone

Listening to an iPod/iPhone (1)

Before use, insert an appropriate Dock adapter in the Dock.

1 Press the MODE button repeatedly to select “iPod”.

iPod

<You can also use the FUNCTION button ( ˙ / ¥ ) on the remote control unit to select “iPod”.

2 Insert the iPod/iPhone into the Dock.

3 Press the Play/Pause button (y/J) on the iPod or the R-4iNT's remote control unit .

The R-4iNT will start playback from the iPod/iPhone’s song list.

<When the iPod/iPhone is inserted while a source other than iPod mode is selected or while the R-4iNT is in the standby mode, “iPod attached – Switch to iPod mode?” is displayed. In this case turn the MULTI JOG to select “YES”, and then press the SELECT button.

<In iPod mode, if an iPod/iPhone that is in playback mode is inserted into the dock, the R-4iNT will automatically start playback from the iPod/iPhone’s song list.

<Make sure to use an appropriate Dock adapter (see previous page).

<The battery of the iPod/iPhone is recharged to the full whenever the iPod/iPhone is docked and the R-4iNT is connected to the AC line.

<If headphones are also plugged into the iPod/iPhone, sound comes from both the headphones and the R-4iNT speakers.

Stopping playback temporarily (Pause mode)

During playback, press the Play/Pause button (G/J). Playback stops at the current position.

To resume playback, press the Play/Pause button (G/J) again.

<You can also use the button on the iPod/iPhone to pause playback.

Skipping to an earlier or later song

During playback, press the Skip buttons (.//) repeatedly until you find the desired song. The selected song will be played from the beginning.

<If the . button is pressed once during playback, the song currently being played will be played from the beginning. To return to the beginning of the previous song, press the . button twice.

Searching for a part of a song

Hold down

During playback, hold down the Search button (. or /) to search a part of a song.

Release it when you find the part you want to hear.

18