AUX in

Listening to an External Source

In addition to connecting other audio devices, you can use the AUDIO IN to listen to an iPod that has no dock connector or when an appropriate Dock adapter is not available.

1 Connect the PHONES jack or audio output jack of a portable audio player to the AUDIO IN jack of the R-4iNT using the supplied stereo mini-plug cable.

AUDIO IN

2 Press the MODE button repeatedly to select “Aux in”.

3 Play the source, and adjust the volume using the Volume button (  or  ) of the R-4iNT and of the audio player.

<When using the headphones jack of a device, if you do not adjust its volume, you might not hear any sound from the R-4iNT.

<Turning the volume of the connected device up too high might cause the sound from your R-4iNT to be distorted. In this case, reduce the volume of the device until the distortion stops and then adjust the volume level of the R-4iNT to a comfortable listening level.

Aux in

<You can also use the FUNCTION button ( ˙ / ¥ ) on the remote control unit to select “Aux in”.

16