3 SpeedTouch™ for Microsoft Windows
Step | Action |
|
|
8 | The 'Setup Complete' window pops up to announce that installation is |
| finished: |
| Click Finish to close the SpeedTouch Setup wizard (application). |
|
|
9 | Plug the ADSL cable, provided in your package, into the receptacle of the |
| SpeedTouch™. Plug the other end of the ADSL cable into the wall socket |
| terminating ADSL service. |
| Note: Depending onto which pins of the wall socket the ADSL signals are |
| assigned, it might be necessary to plug in an RJ11 interchanger into the wall |
| socket prior to connect the ADSL cable. |
|
|
10 | Plug the SpeedTouch™'s USB connector into the PC's USB port. |
| An USB port can be easily located, it is marked with the typical USB symbol: |
|
|
11 | The 'Windows found New Hardware' wizard will automatically continue with |
| the installation of the SpeedTouch™ ADSL modem device: |
|
|
12 | The installation continues with the creation of the appropriate PPP |
| Networking connections. |
|
|
13 | At the end of the procedure the 'Speed Touch |
| allowing you to immediately connect to the Internet (See section “3.2. Using |
| the SpeedTouch™” on page 16). |
| The installation of the SpeedTouch™ is now finished. The SpeedTouch™ is |
| now prepared for connecting you to the Internet. |
|
|
14 | 3EC 36714 BAAA TCZZA Ed. 01 |
|
