Viewfinder

1

7

6 5

2

3

4

1Zebra switch

This switch disables (OFF position) or enables the zebra pattern in the viewfinder which indicates high video levels. Values for the zebra function are selected in the VF menu. (The zebra pattern is switched off when the skin view is on.)

2Option switch

This switch is included on the viewfinder to allow future features to be incorporated.

3Brightness control

Use this rotary control to adjust the brightness of the viewfinder display to suit your needs.

4Contrast control

5Crispening control

This rotary control adjusts the sharpness of the picture displayed in the viewfinder. Reduce the crispening for a better picture when the gain is set to +++.

6Tally switch

The tally switch is used to control the tally indicators at the front of the viewfinder and at the rear of the carrying handle.

When this switch is set to the ON position, the tally indicators light when the camera is on-air. When this switch is set to the OFF position, the tally indicators do not light when the camera is on-air.

7Dioptre

Use this rotary control to adjust the contrast of the viewfinder display to suit your needs.

The dioptre of the viewfinder can be adjusted to suit your eyesight by turning the dioptre ring. The range of the dioptre is +3 to -3.

Location of Controls and Functions

Operator's Manual LDK 5400 - Triax Adapter for LDK 100 Series

4-9

Page 33
Image 33
Technicolor - Thomson 5400LDK manual Viewfinder