Recording functions
Programming a recording
You can record a future programme by programming its recording time. For this you have the choice of manual programming or Naviclick programming, explained on page 25. Open the DVD tray by pressing the OPEN/CLOSE key. Put in a disc with the printed side upwards. Close the tray using the OPEN/CLOSE or PLAY key.
1.From the main menu (MENU key or in Stop mode) select the Timers function with the key or 
then confirm using the OK key.
• The Timers screen is displayed. It contains a list of all the deferred recordings that you | EN |
| |
have already programmed, whether carried out manually, as explained below, or using the |
|
Naviclick function explained on page 25. If nothing has been programmed the screen |
|
simply displays Add Timer. |
|
2.Press the OK key.
•The programming menu is displayed.This menu allows you to define all the parameters necessary for a deferred recording. Select each parameter with the 
or 
key and enter the corresponding
information with the number keys or the 
key as described below.
Note: your DTH 8000 can memorise the parameters of 16 different programmings. In the case of double programming, a warning message is displayed.
3.Name
Give a Name to your programme. Press the INFO key to access the keyboard table. Use the keys 
, 
, 
, 
and OK to compose the title of the recording letter by letter.When complete, select Keep Timer with 
and press OK.
4.Channel
a)Enter the channel number using the digit keys of the remote control (Pr
b)Or select one of the 
key (the socket details are shown on page 16).
Note: selecting the AV2 connector allows you to use the AV Timer function (programming via the AV connector) in order to record a programme from a satellite receiver (or cable) connected to it.
5.Day (s)
Using the digit keys on the remote control type in the date, if the recording is not made the same day, and / or select a period using the 
key.
Once: to record the selected programme according to the parameters you have defined.
Every Fri: to record the same programme the same day every week starting from today (supposing today is Friday).
6.Start time and stop time
Enter the recording start time and then the stop time.
To this end, and according to the features of the receivers, you must:
-either program the receiver with the same beginning and end times, then switch off the DTH 8000 and the receiver,
-or leave the satellite receiver switched on, on the channel to record, program the DTH 8000, then switch it off.
Note: If you have installed the satellite receiver as described in pages 9, 10, and 11, do not enter the beginning and end times.
23
